A = Distance between fixing centres 29mm
Step 0-10mm from face of sash to face of frame can be accommodated
STRDU02
For use on flush aluminium or steel frames
0-10mm step can be accommodated
Stylish design and simple to adjust to accommodate different steps
Adjustable body - no need for packers
Suitable for top hung opening out windows.
Tested to over 100,000 cycles.
150mm throw, folding action to open and close sash
Over centre design means that the opener 'locks' securely into place when the window is closed
The link bar will divide the opening gap in half which means that the opening will effectively become approximately 75mm which is well within the guidelines for second storey and higher windows
A minimum sash height of 250mm is required where butt hinges are fitted or 400mm where friction hinges are used
One, two or three openers may be required depending on the size of the window
Single opener for sash width up to 500mm
Two openers plus link bar for sash width 600mm to 900mm
Three openers plus link bar for sash width 900mm to 1500mm
300mm, 600mm, 900mm, 1000mm and 1200mm link bars available depending on sash width
We recommend that the link bar is 2/3 to 3/4 of the sash width
Link bar can be easily cut to exact size required
Centre ring (STRX02) may be used to enable a pole operator to be used
Pole operator for high level windows (X028) available in 1, 1.5 or 2m length
Pole operators are not recommended for windows above 3m from finished floor level or where windows are in a deep reveal.
Ordering Information
Part code - STRDU0220
Description - Duoflex opener flush silver
Pack size - 30 (can be supplied in any quantity)
Part code - STRDU0225
Description - Duoflex opener flush white
Pack size - 30 (can be supplied in any quantity)
Part code - STRDU0201
Description - Duoflex opener flush black
Pack size - 30 (can be supplied in any quantity)
Part code - STRDU0243
Description - Duoflex opener flush polished brass
Pack size - 30 (can be supplied in any quantity)
Part code - STRDU0244
Description - Duoflex opener flush satin stainless steel plated
Pack size - 30 (can be supplied in any quantity)
Other sizes and finishes available to special order
Specification Information
STRDU02 suitable for flush aluminium or steel frames, 0-10mm step can be accommodated
Top hung outward opening windows
Sash width up to 1500mm (one, two or three openers can be used depending on sash width)
Two or Three Openers can be used together with a link bar
Link bar should be 2/3 to 3/4 sash width
Fitting Instructions
Certification
Tested to over 100,000 operations
Patent approved GB24902896
12 month warranty