Three point push pad latch for use on a single door (timber, metal or PVCu) or the active leaf of a pair of rebated doors.

Comprises a mechanism, covered connecting rods, horizontal latching pullman latches at the top and bottom and a push pad with photoluminescent insert.

Standard devices suit doors up to 2585mm high.
Longer rods are available for doors up to 3150mm high.

Supplied with strikers for timber or metal doors as standard - strikers for PVCu available separately

Available with a dogging (hold-back) facility however this should not be used on fire/smoke door assemblies but fine for escape doors

Micro-switch can be fitted in the mechanism this allows the door to be fitted to equipment that monitors the door status. If required state when ordering.

Optional outside access devices are available to provide entry from outside

Part code - PH3580320
Description - Three point push pad latch, silver

Part code - PH3580325
Description - Three point push pad latch, white

Part code - PH3580301
Description - Three point push pad latch, black

Part code - PH3580344
Description - Three point push pad latch, satin stainless steel plated

Part code - PH3580355
Description - Three point push pad latch, polished stainless steel plated

Part code - PH3580343
Description - Three point push pad latch, polished brass plated

If dogging is required use codes above but replace the 3 before the finish code with a 4 e.g.

Part code - PH3580420
Description - Three point push pad latch, silver complete with dogging

If microswitch is required, please state 

Other colours and finishes available to special order

Emergency exit devices with push pad can be fitted in offices and other buildings where the occupants are familiar with their surroundings and where they know where the exits are and where the emergency exit hardware is fitted. In these situations a panic situation in unlikely to develop. PH358 three point push pad latch is suitable for single timber, metal or PVCu doors or the active leaf of a pair of rebated doors.

Push pad fitting instructions

Tested and certified to EN 179:2008 - classification 3-7-7-B-1-4-4-2-B-A

CE / UKCA Marked

Certifire approved 240 minutes
(Certifire CF5394)

Two year warranty (conditions apply)

Declaration Of Performance (CE)

Declaration Of Performance (UKCA)