PH356
Three point push pad bolt for use on a single door (timber, metal or PVCu), the inactive leaf of a pair of rebated doors or both leaves of a pair of straight edged doors.
The centre mechanism can be blanked off with the plate supplied to convert it to a two point device for double doors.
Comprises a mechanism, covered connecting rods, vertical latching pullman latches at the top and bottom and a push pad with photoluminescent insert.
Standard devices suit doors up to 2585mm high.
Longer rods are available for doors up to 3150mm high.
Supplied with strikers for timber or metal doors as standard - strikers for PVCu available separately
Available with a dogging (hold-back) facility however this should not be used on fire/smoke door assemblies but fine for escape doors
Micro-switch can be fitted in the mechanism this allows the door to be fitted to equipment that monitors the door status. If required state when ordering.
Optional outside access devices are available to provide entry from outside
Ordering Information
Part code - PH3560320
Description - Three point push pad bolt, silver
Part code - PH3560325
Description - Three point push pad bolt, white
Part code - PH3560301
Description - Three point push pad bolt, black
Part code - PH3560344
Description - Three point push pad bolt, satin stainless steel plated
Part code - PH3560355
Description - Three point push pad bolt, polished stainless steel plated
Part code - PH3560343
Description - Three point push pad bolt, polished brass plated
If dogging is required use codes above but replace the 3 before the finish code with a 4 e.g.
Part code - PH3560420
Description - Three point push pad bolt, silver complete with dogging
If microswitch is required, please state
Other colours and finishes available to special order
Specification Information
Emergency exit devices with push pad can be fitted in offices and other buildings where the occupants are familiar with their surroundings and where they know where the exits are and where the emergency exit hardware is fitted. In these situations a panic situation in unlikely to develop. PH356 three point push pad bolt is suitable for single timber, metal or PVCu doors, the inactive leaf of a pair of rebated doors or both leaves of a pair of straight edged doors.
Fitting Instructions
Certification
Tested and certified to EN 179:2008 - classification 3-7-7-B-1-4-4-2-B-A
CE / UKCA Marked
Certifire approved 240 minutes
(Certifire CF5394)
Two year warranty (conditions apply)