Three point panic bolt for use on a single door, the inactive leaf of a pair of rebated doors or both leaves of a pair of straight edged double doors. The centre mechanism can be blanked off with plate supplied to convert it into a two point device when using it on double doors.

Comprises a mechanism, idler and crossarm with covered connecting rods and vertical latching pullman latches at the top and bottom.

Suits doors up to 1050mm wide, longer crossarms are available for wider doors upto 1450mm wide and 2585mm high. Longer rods are available to suit doors upto 3150mm high.
Supplied with strikers for timber or metal doors as standard - strikers for PVCu available separately

Available with a dogging (hold-back) facility however this should not be used on fire/smoke door assemblies but fine for escape doors

Micro-switch can be fitted in either the mechanism or idler, this allows the door to be fitted to equipment that monitors the door status. If required state preferred location when ordering

Optional outside access devices are available to provide entry from outside

Part code - PH3550320
Description - 3 point panic bolt, silver

Part code - PH3550325
Description - 3 point panic bolt, white

Part code - PH3550301
Description - 3 point panic bolt, black

Part code - PH3550344
Description - 3 point panic bolt, satin stainless steel plated

Part code - PH3550355
Description - 3 point panic bolt, polished stainless steel plated

Part code - PH3550343
Description - 3 point panic bolt, polished brass plated

Part code - PH3550382
Description - 3 point panic bolt, silver with green cross arm

Part code - PH3550385
Description - 3 point panic bolt, white with green crossarm

Part code - PH3550381
Description - 3 point panic bolt, black with green crossarm

Part code - PH3550380
Description - 3 point panic bolt, black with silver crossarm

If dogging is required use codes above but replace the 3 before the finish code with a 4 e.g.

Part code - PH3550420
Description - 3 point panic bolt, silver complete with dogging

If microswitch is required state complete with microswitch fitted in mechanism or idler as appropriate

Other colours and finishes available to special order

Panic devices with crossarm can be fitted to doors in public buildings such as schools, hospitals, retail outlets, nightclubs etc where people are unfamiliar with the surroundings.

PH355 three point bolt is suitable for single doors, the inactive leaf of a pair of rebated doors or both leaves of a pair of straight edged doors.

Push bar fittings instructions

Tested and certified to EN 1125:2008 - classification 3-7-7-B-1-4-2-2-A-A

CE / UKCA Marked

Certifire approved 240 minutes
(Certifire CF5394)

Two year warranty (conditions apply)

Declaration Of Performance (CE)

Declaration Of Performance (UKCA)